AmiSnip 1.2
===========
AmiSnip is a small commodity that lets you capture any area of the
screen with the mouse, the same way Windows does with Win+Shift+S.
Press the hotkey (LAmiga + Shift + S by default). The front screen
freezes and gets darker. Drag a frame around the area you want: it is
shown at full brightness, with its size in pixels next to it. You can
move the frame or resize it with the handles before taking the picture.
When you confirm, a small floating menu appears next to the frame:
Copy to clipboard ... ready to paste with Amiga+V in any program
Save as... .......... choose a drawer and a name; the extension
picks the format (.iff .png .jpg .bmp .gif)
Open in MultiView ... opens the capture in the program you choose
in the preferences (PPaint, MultiView...)
Back ................ return to the frame to change it
It works with native screens (OCS/ECS/AGA, including EHB and HAM) and
with RTG screens (Picasso96 / CyberGraphX, 8 to 32 bit).
Installation
------------
Double-click "Install-AmiSnip". The installer copies the commodity to
SYS:WBStartup (or another drawer you choose) and the preferences editor
to SYS:Prefs, and can start AmiSnip straight away.
If you have AmiSnip 1.0 running, quit it from Exchange before
installing.
Capturing
---------
Drag with the left button ...... draw a new frame
Drag inside the frame .......... move it
Drag an edge or a handle ....... resize it
Return / Enter ................. confirm the frame
Double-click inside the frame .. confirm the frame
Return with no frame / F ....... take the whole screen
Esc / right mouse button ....... cancel
In the floating menu you can also use the keys C (copy), S (save as),
O (open), Return (copy) and Esc (back).
Running AmiSnip again while it is already active starts a capture, so
you can launch it from a dock or toolbar.
Preferences (SYS:Prefs/AmiSnipPrefs)
------------------------------------
AmiSnip enabled ...... switch the hotkey on or off
Hotkey ............... any commodities key description,
e.g. "lcommand shift s" or "ctrl alt p"
Save drawer .......... default drawer for the files
File format .......... IFF ILBM, PNG, JPEG, BMP or GIF
JPEG quality ......... 10 to 100 (default 85)
After capture ........ show the menu, or go straight to:
copy to clipboard / save to drawer /
copy + save
Open with ............ program used by "Open in..."
Dimming .............. none, light, medium or strong
Frame colour ......... white, yellow, cyan, red or green
Beep after capture ... confirmation beep
Save stores the settings for good (ENVARC:), Use only until the next
reboot (ENV:). AmiSnip picks up the changes immediately. The
Project menu has About and Quit; the Edit menu can reset to the
defaults or go back to the last saved settings.
You can also open the preferences with "Show" in Exchange.
From the CLI: AmiSnip [QUIT] [CX_PRIORITY=<n>]
QUIT stops a running AmiSnip.
Notes
-----
- File formats:
IFF ILBM 24-bit (RTG) or with the screen palette (native).
PNG compressed (deflate), 24-bit or 8-bit indexed.
JPEG baseline, 4:4:4 (no colour subsampling, so text stays
sharp), quality set in the preferences.
BMP 24-bit or 8-bit indexed, uncompressed.
GIF 8-bit. Native screens keep their palette; RTG captures
with up to 256 colours keep them exactly, others use a
252-colour palette with ordered dithering.
The clipboard always gets IFF ILBM.
- On native screens the area outside the frame is dimmed using one
extra bitplane. Screens with 256 colours, EHB, HAM or dual playfield
have no spare plane, so they are shown without dimming (the frame
and handles still work).
- HAM captures are converted to 24-bit for PNG, JPEG, BMP and GIF.
- "Open in..." saves the capture to T: first.
- A beep without the "Beep after capture" option means something
failed: not enough memory, a drawer that does not exist, etc.
Requirements
------------
AmigaOS 3.0 or newer (3.1, 3.2 and CaffeineOS are the targets), 68000+.
The About picture in the preferences needs OS 3.1 or newer.
For RTG screens: Picasso96 or CyberGraphX (cybergraphics.library).
RTG captures need about 3 x width x height bytes of free memory twice
(about 12 MB for 1920x1080).
Credits
-------
Programmed in 68000 assembly by Isra Ortuño - Amigatronics, with the
help of Claude (Anthropic).
https://amigatronics.com
https://en.amigatronics.com
History
-------
1.2 (21.11.2026) New formats: compressed PNG, JPEG (with quality
setting), BMP and GIF. HAM captures can be saved in
every format. New icons.
1.1 (21.11.2026) Floating menu after the capture (copy, save as,
open in a program). Preferences editor with About.
Installer. QUIT argument. "Show" in Exchange opens
the preferences.
1.0 (21.11.2026) First release.
|