Version History
===============
V1.0 - initial release
V1.1 - fixed problems with media larger than 2GB
       added support for TD64 commands (NSCMD_TD_READ64, NSCMD_TD_WRITE64)
V1.2 - fixed some crashes that occurred after longer usage
V1.3 - fixed problems with TD64 commands (were not working)
       added support for higher block addresses via SCSI Group1 commands


SCSI over USB
=============
USB adapters promising to connect existing SCSI-drives to a
system without SCSI controller have so far mostly required
a vendor specific driver that was not provided for Amiga or Unix.
The RATOC U2SCX adapter exceptionally supports the standard
UBS mass storage protocol, allowing it to be used under Unix
and, yep, the Amiga. (For this mode to be activated, only one
SCSI unit may be connected to it!)

This patch
==========
This tool eliminates problems that still occur when using
SCSI drives via a RATOC adapter. To use it, select
the "Fake Inquiry" option in PoseidonUSB, mount the drive
you want to connect with a proper mountlist (correct number of
total blocks) and type "USBtoSCSIPatch <drive>" with <drive>
being the mounted drivename (dh2, dh9...);

Provided "as is"
================
There is absolutely no warranty provided for the stability and
data security when you use this tool. Consider this Beta or
Alpha status software. Before you use it, make some tests with
your configuration (DiskCaches, Filesystems, SCSI devices ...)
to determine if it's functioning properly. Many incompatibilities
are to be expected with this tool. Switch off EHCI controllers
in Poseidon if stability is better in the slower USB1.0 mode.

Future
======
Given the importance of SCSI for traditional Amiga users,
the support for USB-to-SCSI adapters like RATOC U2SCX
should best be included in the Poseidon stack, rather than
a patch. There is therefore no intention to support this
patch more than temporarily.


Required software:
- Poseidon USB Stack

Required hardware:
- RATOC U2SCX USB to SCSI converter (one for each SCSI-drive)
  (currently available from http://www.firewireshop.com)
- Amiga USB controller (tested with SubwayUSB and ElBox SpiderII)


Notes
=====
USBtoSCSIPatch was successfully tested with these SCSI drives:
- HP C1113F 2.6GB (magneto-optical drive)
- Fujitsu DynaMO 2.3GB (magneto-optical drive)
- Matsushita CR-507-B (CD-ROM drive)
- IBM DGHS 4.5GB (Harddisk drive)

CD-ROM drives should work with CacheCDFS. If you encounter
stalling of data-access from the drive, a workaround is to
re-read the directory of the CD ("dir Cd0:") to resume.

If conflicts appear with other patches/drivers, try to start
the other patch/driver first and USBtoSCSIPatch last.
(e.g. start Envoy-networking first and then USBtoSCSIPatch)

To format new media, use the Format-Quick-option since the
track-format command is not supported by this patch.

If your media does not have a blocksize of 512 or multiples of
512 (1024,2048 etc), you'll have to use a third party software
to do a low-level format of the SCSI drive that resets the
blocksize.
(e.g. some IBM Harddrives use 514 bytes as default blocksize)
 

----------------------------------------------------------------
Usage: USBtoSCSIPatch <drivename>
----------------------------------------------------------------
Version: 1.3
Distribution: Freeware
Author: powerstackusa.net
----------------------------------------------------------------
This tool will install a patch for usbscsi.device based
drives that fixes errors when using the RATOC U2SCX
USB to SCSI adapter or other USB drives requiring the fix.
The patch converts all CMD_READ/READ64 and CMD_WRITE/WRITE64
commands to DirectSCSI for accessing usbscsi.device.
----------------------------------------------------------------
NOTE: No warranty is given for loss of data that might
      result from this tool. USE AT YOUR OWN RISK!
----------------------------------------------------------------
 

 PERMSSN    UID  GID    PACKED    SIZE  RATIO METHOD CRC     STAMP          NAME
---------- ----------- ------- ------- ------ ---------- ------------ -------------
[generic]                  595    1274  46.7% -lh5- bf11 May 15  2005 RATOC_U2SCX.dump
[generic]                 1899    4097  46.4% -lh5- 7309 Feb 11  2006 ratocUSBSCSIpatch13.readme
[generic]                14671   45716  32.1% -lh5- 7266 Feb 11  2006 USBtoSCSIPatch
---------- ----------- ------- ------- ------ ---------- ------------ -------------
 Total         3 files   17165   51087  33.6%            Feb 14 07:45