Most of the Tandberg TDC3600 SCSI tape drives are configured to
automatically retension the tape every time a tape is inserted into
the drive, or when the system is reset or powered on.

TandbergConf provides the ability to reconfigure the drive so it will
automatically position the tape at the load point (beginning of the tape)
when the tape is inserted or the system is reset or powered on.

This configuration can be temporary (won't survive a reboot), or permanant.

Type TandbergConf without any parameters for usage instructions.

The specs on how to program the Tandberg drive came from Goncal
Badenes (badenes@imec.com), and are included in this archive.

The code is a very small subset of the execllent program SCSIutil,
written by Gary Duncan (gduncan@philips.oz.au), and updated for CD-ROM
by Heiko Rath (hr@brewhr.swb.de). The code is used by permission of the
author.

This code is freely distributable for non-commercial purposes.

Version 1.0

Written by David Lowrey (dwl10@juts.ccc.amdahl.com)

Requires AmigaDOS 2.0 or higher.

 PERMSSN    UID  GID    PACKED    SIZE  RATIO METHOD CRC     STAMP          NAME
---------- ----------- ------- ------- ------ ---------- ------------ -------------
-rw-rw-r--  4219/1         537     945  56.8% -lh1- 838a Feb 23  1994 .Product-Info
-rw-rw-r--  4219/1         680    1220  55.7% -lh1- 4b69 Feb 23  1994 README
-rw-rw-r--  4219/1        2190    6007  36.5% -lh1- 0147 Feb 23  1994 Tandberg.specs
-rw-rw-r--  4219/1       12104   21516  56.3% -lh1- 7d68 Feb 23  1994 TandbergConf
-rw-rw-r--  4219/1        5169   14397  35.9% -lh1- d52b Feb 23  1994 TandbergConf.c
---------- ----------- ------- ------- ------ ---------- ------------ -------------
 Total         5 files   20680   44085  46.9%            Feb 24  1994